da-soft - Data Access Technologies

Additional

dbCAP

AnyDAC

ThinDAC

NCOCI8

Topic: Problems installing AnyDac with C++ Builder 6

Forum List » AnyDAC » v 1.x General English

apalanche
User

Fresh Boarder

Posts: 2

Karma: 0

Problems installing AnyDac with C++ Builder 6

Posted: 2005/05/23 17:25

Hi,

First of all thanks for Dmitry for his AnyDac software.

When i almost finished the setup de batchfile says: You must installed D6, D7 or D2005. I ve C++ Builder enterprise withe update pack 4. Then i looked to _CompileBCB.bat to look what it does. It tries to make .bpk and .mak files what i could not find those files under de AnyDac directory. Then i tried to open in C++ Builder: File>Open>PACK-directory> and tried to open. But an error: The interface was not supported. Unable to create E

rogram filesda-softAnyDAcPACKdaADComID6.dpk

Is there a way to let it work within C++ Builder?

Thanks a lot.

Diman

Admin

Posts: 1495

Karma: 19

RE: Problems installing AnyDac with C++ Builder 6

Posted: 2005/05/23 18:39

Hi !

AnyDAC v 1.0.3 will fix that. It will be released in ~2 days.

Regards,
Dmitry

apalanche
User

Fresh Boarder

Posts: 2

Karma: 0

RE: Problems installing AnyDac with C++ Builder 6

Posted: 2005/06/03 14:22

Hi,

The same problem, i installed AnyDac 1.04, the batch file says still u have to use D6, D7 or D8. I would try to make the bpl file manually, but where is the bpl file stored? Under system32 directory and what is the name of the bpl file?

Regards,
Apalanche

Forum List » AnyDAC » v 1.x General English